Anderson Powerpole PP15/PP30/PP45 Connector
2-pin rectangular connector
Standards: Anderson Power Products specification
What is the Anderson Powerpole pinout?
The Anderson Powerpole PP15/PP30/PP45 Connector has 2 pins. Pin 1 is POS (power). Pin 2 is NEG (ground).
Standards: Anderson Power Products specification
Pin Assignment Table
| Pin | Signal | Type | Description |
|---|---|---|---|
| 1 | POS | power | Positive (+) - RED housing |
| 2 | NEG | ground | Negative (-) - BLACK housing |
Signal Types
Common Applications
Need another printable connector reference?
Use the pinout as a working reference now, then jump to the full library or the next workflow when you need it.
Map this connector into your BOM workflow →The Anderson Powerpole connector has 2 pins: Pin 1 (POS), and Pin 2 (NEG). Common in Ham radio and RC vehicles.
Anderson Powerpole Wiring Guide
Powerpole connectors are genderless (hermaphroditic), stackable DC power connectors developed by Anderson Power Products. They are the de facto standard in amateur radio and emergency communications due to their reliability and ease of use.
Wiring Tips & Best Practices
ARES/RACES standard orientation: red housing on left, black housing on right when viewed with tongue facing up. PP15 rated 15A, PP30 rated 30A, PP45 rated 45A. Use appropriate wire gauge: 16 AWG for PP15, 12 AWG for PP30, 10 AWG for PP45.
Common Issues
Incorrect polarity orientation (always follow ARES standard for interoperability). Using PP15 contacts with high-current applications causes overheating. Contacts not fully seated in housing can pull out under load. Crimping issues - use proper Anderson crimping tool.
Why Use Interactive Diagrams?
- Accuracy: Hover over pins to see exact signal names and descriptions
- Clarity: Color-coded by signal type (power, ground, data)
- Printable: Export clean diagrams for shop floor reference