Deutsch DT Series 2-Pin Connector
2-pin rectangular connector
What is the Deutsch DT 2-Pin pinout?
The Deutsch DT Series 2-Pin Connector has 2 pins. Pin 1 is Cavity 1 (reserved). Pin 2 is Cavity 2 (reserved).
Pin Assignment Table
| Pin | Signal | Type | Description |
|---|---|---|---|
| 1 | Cavity 1 | reserved | Deutsch DT cavity 1 |
| 2 | Cavity 2 | reserved | Deutsch DT cavity 2 |
Signal Types
Common Applications
Need another printable connector reference?
Use the pinout as a working reference now, then jump to the full library or the next workflow when you need it.
Map this connector into your BOM workflow →The Deutsch DT 2-Pin connector has 2 pins: Pin 1 (Cavity 1), and Pin 2 (Cavity 2). Common in Automotive sensors and Low-current sealed harnesses.
Deutsch DT 2-Pin Cavity Reference
Deutsch DT connectors are defined by cavity numbering rather than fixed signal semantics. Use cavity numbers consistently between plug and receptacle drawings so the released harness package matches the mating pair.
Wiring Tips & Best Practices
Document cavity 1 and cavity 2 explicitly on the BOM, wire list, and assembly print. These connectors are often used for power/sensor circuits where polarity mistakes cause field failures.
Common Issues
The most common mistake is swapping cavity numbering between mating halves or labeling the connector body orientation inconsistently in the release print.
Why Use Interactive Diagrams?
- Accuracy: Hover over pins to see exact signal names and descriptions
- Clarity: Color-coded by signal type (power, ground, data)
- Printable: Export clean diagrams for shop floor reference