Deutsch DT Series 4-Pin Connector
4-pin rectangular connector
What is the Deutsch DT 4-Pin pinout?
The Deutsch DT Series 4-Pin Connector has 4 pins. Pin 1 is Cavity 1 (reserved). Pin 2 is Cavity 2 (reserved). Pin 3 is Cavity 3 (reserved). Pin 4 is Cavity 4 (reserved).
For Deutsch DT connectors, the important release detail is consistent cavity numbering, not a universal signal assignment. This page provides the pin numbering reference used in many sealed harnesses.
Filter:
Pin Assignment Table
| Pin | Signal | Type | Description |
|---|---|---|---|
| 1 | Cavity 1 | reserved | Upper-left cavity |
| 2 | Cavity 2 | reserved | Upper-right cavity |
| 3 | Cavity 3 | reserved | Lower-left cavity |
| 4 | Cavity 4 | reserved | Lower-right cavity |
Signal Types
Reserved
Common Applications
ECU harnessesActuator wiringServiceable sealed interfaces
Need another printable connector reference?
Use the pinout as a working reference now, then jump to the full library or the next workflow when you need it.
Map this connector into your BOM workflow →The Deutsch DT 4-Pin connector has 4 pins: Pin 1 (Cavity 1), Pin 2 (Cavity 2), Pin 3 (Cavity 3), and Pin 4 (Cavity 4). Common in ECU harnesses and Actuator wiring.
Deutsch DT 4-Pin Cavity Reference
For Deutsch DT connectors, the important release detail is consistent cavity numbering, not a universal signal assignment. This page provides the pin numbering reference used in many sealed harnesses.
Why Use Interactive Diagrams?
- Accuracy: Hover over pins to see exact signal names and descriptions
- Clarity: Color-coded by signal type (power, ground, data)
- Printable: Export clean diagrams for shop floor reference